No. If you’re looking for motorized shades for triangular windows, World Wide Shades makes a custom fixed panel for a pure triangle. The panel follows the angled opening, but it does not raise, lower, or roll away. If you also have a separate rectangular window, you can look at a motorized treatment for that opening while keeping the triangle covered with its own panel.
That distinction matters when you’re deciding how much daylight to keep. A fixed panel is a good candidate when the same light level suits the triangle throughout the day. If you want to alternate between bare glass and shade, the triangle panel cannot make that change for you. Explore specialty-shape shades to find the right starting point for your opening.
Why a triangular panel stays fixed
A pure triangle has three sides and narrows toward a point. Think of the centered window at the top of an A-frame or the right triangle tucked under a sloping roof. World Wide Shades builds the triangle treatment to follow that outline, not to retract like the roller shade you might use on a rectangle. Fabric choice determines how much light passes through while the panel is in place.
A trapezoid is not the same as a pure triangle. A World Wide Shades trapezoid shade operates on its rectangular section only; the angled portion does not move with it. If you’re looking at a tall window with a sloped top, check where the frame divides the glass before deciding what you have. A single specialty opening and two separate openings stacked together can look similar from across the room, but they’re different orders.
Check the triangle shade page for shape-specific guidance. If you aren’t sure whether you have one opening or two, contact World Wide Shades or call (844) 674-2716 with a photo that shows the whole assembly, including the frame and any dividers. For an example of why that distinction matters on other angled windows, see the guide to custom shades for hexagon windows.
Decide which window needs to change throughout the day
Start with the light problem, then match it to the opening. For example, if the triangle above a seating area sends glare across a TV every afternoon and you don’t mind filtering the high glass the rest of the day, consider a fixed panel there. If the lower window is where you want to switch between daylight and privacy, that’s the opening to evaluate for a moving shade.
In a room with separate triangular and rectangular windows, give each treatment a job. A fixed triangle panel can take the edge off overhead brightness, while a motorized rectangular shade can close when you want privacy and reopen when you want the view. In a room with only triangular glass, there’s no separate rectangle to motorize. If keeping the glass uncovered at certain times is essential, decide whether a fixed panel is right for you before placing an order.
Pay attention to the room at the time of day you’re trying to improve. Glare at a desk at 4 p.m. might come from lower glass even when the triangle looks brightest. Identify which opening the light actually comes through. The Miami waterfront condo shade guide offers another example of weighing glare against the view. If the hard-to-reach glass is overhead rather than in a wall, read the skylight shades guide for that separate type of opening.
Choose fabric for the light you want every day
For a fixed triangle, choose fabric for the light you want even when the room is already dim, not just when the sun is at its strongest. A light-filtering fabric may suit a living room where you still want a soft glow. If less light is the priority, consider a more opaque fabric. In a bedroom, evaluate the triangle and any lower windows together: closing a rectangular shade won’t change the amount of light passing through the fixed panel above it.
World Wide Shades offers 500+ colors across 40+ fabric families from Phifer, Mermet, Ferrari, Copaco, Senbesta, and Texstyle. The fabric library shows genuine fabric photos and the mills’ published openness factors where applicable. For solar fabrics, a lower openness factor generally means a tighter weave with less open area. Don’t use openness alone to judge color, texture, or nighttime privacy.
To make two differently shaped treatments look related, compare their colors side by side before assuming you need identical fabrics. You might want to filter sunlight at the peak but choose more opacity at street level. Look at the fabric photos next to a picture of your trim and walls so you can compare how warm or cool the colors appear. For more on coordinating shades across different openings, see the Philadelphia Main Line roller shade guide.
Pick motor controls only for the separate rectangular shade
For an applicable motorized rectangular shade, World Wide Shades uses a rechargeable battery motor with no wiring. Automate is the default. If you already use a Somfy remote, you may choose a paired Somfy motor instead. Make that choice based on which remote system you want to use, and ask about compatibility before assuming a new shade will pair with a remote you own.
A remote is required for the motorized shade. The Push 5 can control up to five shades, which is useful if you have several separate rectangular treatments to manage. For Automate motors only, the Pulse 2 adds app and voice control as well as schedules. It does not replace the required remote. None of these controls applies to the fixed triangle panel.
Any USB-C charger works for charging, or you can add the Motor Charger to your order. A charger is not included. If the separate motorized shade is mounted high, think about how you’ll reach it to recharge the motor, not just how you’ll operate it remotely. Review motorized shade options for the separate rectangle, or read the Bergen County custom shades guide for a room-by-room approach.
Confirm the shape and fit before production
Don’t use a standard rectangular measuring routine for the triangle. To start, photograph the whole window and label each opening if there are several. Then review the relevant specialty-shape page for the measurements your shape requires. If the drawing doesn’t look like your opening or you’re not sure where an edge starts, ask World Wide Shades to confirm what to measure instead of submitting your best guess.
World Wide Shades makes its shades entirely by hand to order in the USA. Specialty shapes, including triangles, trapezoids, pentagons, hexagons, arches, and skylights, are custom-made. Plan on 3–4 weeks for specialty shapes, with free U.S. shipping. If you’re ordering for a renovation, make sure the dimensions you submit reflect the trim and mount that will actually be in place.
Custom orders are not returnable. A manufacturing defect is remade free within 30 days, and motors are covered for one year. If a shade is mismeasured, World Wide Shades provides a one-time free recut, with the customer covering shipping. Confirm the opening shape and measurements before ordering so the finished treatment matches the approved specification.
Frequently asked questions
No. A pure triangle is a fixed panel cut for the shape of the opening. Choose the fabric for how you want the window to look and filter light while covered, not for a position you plan to change later.
You can consider a motorized treatment if the lower window is a separate rectangular opening. If the glass instead forms one specialty opening, ask the team to confirm the shape and treatment before you configure a separate shade.
Only if your opening is actually a trapezoid. Its shade operates on the rectangular section only. A triangle has no rectangular section to operate, so ordering a trapezoid shade isn’t a way to make a triangle panel move.
The remote is required for an applicable motorized rectangular shade. A Pulse 2 is optional for Automate motors if you want app control, voice control, or schedules. A fixed triangle panel needs neither.
Open the shade builder to see live pricing for the configuration you’re considering where available. If you’re unsure which opening or shape to enter, confirm that with the team first so you’re pricing the right treatment.
Ready to Order?
- Confirm the shape and measure. Start with the specialty-shape options, then follow the exact guidance for your opening. Ask if the glass or frame doesn’t match the diagram.
- Choose the fabric. Browse the fabric library and decide how much light you want coming through the fixed panel day to day.
- Select controls if you need them. For a separate eligible rectangular window, choose the motor and required remote, then decide whether to add an Automate hub or charger.
- Check live pricing and order. Review the available configuration in the builder, confirm the details, and place your custom order.
If you’re still deciding between a fixed panel alone and two separate treatments, contact World Wide Shades or call (844) 674-2716 before ordering. Have a photo of the full window wall handy so the team can see which sections are separate openings.



