How to Measure Your Windows
Accurate measurements ensure a perfect fit. Follow these steps for inside mount or outside mount installation.
Inside Mount (most common)
The shade sits inside the window frame for a clean, flush look.
- 1
Check Depth First
Measure from the front of the frame to the glass. Your window frame needs at least 1.5" of depth for inside mount. For motorized, 2.5" is recommended. Less than 1.5"? Choose outside mount instead.
- 2
Measure Width
Measure the inside width of your window frame at the top, middle, and bottom. Use the narrowest measurement.
- 3
Measure Height
Measure the inside height at the left, center, and right. Use the tallest measurement so the shade reaches the sill across the full width.
- 4
Enter the Exact Opening Size
Don't make any deductions. The factory adjusts for clearance so your shade fits and operates properly.
Outside Mount
The shade mounts on the wall or frame above the window — ideal for maximum light blocking.
- 1
Measure Width
Measure the width of the window opening (or trim to trim). We recommend adding 2–3 inches on each side of the window for full coverage and to minimize light gaps.
- 2
Measure Height
Measure from where the top of the shade will sit — typically 3 inches above the window frame for bracket clearance — down to the window sill. No sill? Extend the measurement 2 inches below the opening.
Pro Tips
- • Use a metal tape measure — fabric tapes stretch and give inaccurate readings
- • Measure in inches, to the nearest 1/8" — round width down and height up
- • Measure each window individually — even windows that look the same can vary by 1/4" or more
- • Record every window as Width × Height (W × H) and label it by room
- • Prefer paper? Download the printable measuring guide (PDF)
- • When in doubt, contact us — we offer free measurement consultations