Custom shades are easiest to plan before a renovation is complete and safest to dimension after the windows and their finished trim are ready. That distinction matters: you can choose fabric, opacity, and controls early, but the final measurements should reflect the completed opening. The goal is to arrive at handover with a shade specification prepared and dimensions verified, not to order from an unfinished rough opening.
World Wide Shades shades are made by hand to order, with delivery in 2 to 4 weeks from order. Limited-stock fabrics and specialty shapes take 3 to 4 weeks. Build that stated window into the renovation schedule, and avoid promising yourself a faster delivery date. Start planning the order in the builder while finishes are being selected, then confirm the measurements when the installer has completed the opening.
Separate design planning from final measurement
During design and construction, gather the decisions that do not depend on the final dimensions. Decide which rooms need blackout fabric, which should filter daylight, and which benefit from a view-preserving solar fabric. Consider whether tall or hard-to-reach windows should be motorized. If the project has a consistent palette, shortlist coordinated fabrics across rooms while allowing the opacity to change by use.
Do not treat an architectural drawing or a rough opening measurement as the final shade size. Window replacement, casing, drywall, tile, and finish work can all define the final mounting area. Wait until the window and the details that affect frame depth and overlap are complete before entering final dimensions. That avoids designing an inside mount for a frame that does not have enough finished depth or an outside mount that conflicts with the casing.
Use the project calendar to reserve a measurement point after the finish work around each window is done. If the room is handed over before all details are complete, measure only openings whose mounting surfaces are finished. If several rooms are completed in phases, keep each window’s dimensions and fabric decision associated with that opening rather than relying on one project-wide estimate.
Use the lead time to plan the order window
World Wide Shades allows 2 to 4 weeks from order for delivery; orders that use limited-stock fabrics or specialty shapes should be planned on a 3 to 4 week window. Use those lead times when you plan the move-in or furniture schedule. If your renovation milestone is firm, order only when the final configuration and measurements are verified, and keep enough flexibility around delivery for receiving and installing the shades after they arrive.
This planning is especially important when multiple rooms depend on the shades for privacy or light control. You may choose one priority room, such as a street-facing bedroom, and order that configuration once its opening is complete. The rest of the project can follow when their measurements are ready. Do not assume every window will be finished on the same date or that an early order can be changed after it enters production.
Custom orders are not returnable. That makes a deliberate sequence valuable: settle the material and controls while decisions are easy to make, then verify the finished opening, measure carefully, review each line of the configuration, and submit the order. If window specifications change during the renovation, update the shade plan before ordering rather than trying to use the earlier dimensions.
For homeowners replacing the windows as part of the project, see what to recheck after window replacement. For a project still at the design phase, custom shades for new construction offers related planning considerations. Review World Wide Shades fabrics while selecting finishes, and save the exact color and opacity you want to compare later.
Choose fabric for the completed room
The final room changes how a fabric looks. Wall paint, flooring, furniture, and the direction of daylight can alter whether a color feels warm, cool, or too prominent. If you are selecting finishes before the handover, use the mill’s fabric photography and published specifications to narrow the field, then revisit the choices against the completed palette before ordering.
World Wide Shades offers 500+ colors in more than 40 fabric families, with blackout and light-filtering choices from Phifer, Mermet, Ferrari, Copaco, Senbesta, and Texstyle. Each fabric has its mill’s published openness factor and a genuine swatch photo. There is no swatch or sample program, so use the available product details and images as your decision tools.
Choose blackout fabric when the room’s main requirement is darkness while the shade is lowered, such as a bedroom or media space. Choose light-filtering fabric to soften daylight in a living room, dining area, or office. Solar fabric can help when managing glare while preserving a view is important. A published openness factor compares the weave; it does not guarantee nighttime privacy.
It may make sense to coordinate color across the home while using different fabric types in different rooms. A pale neutral can carry through bedrooms and common spaces, with blackout selected for a sleeping room and light filtering for a living area. Read how much custom roller shades cost for what to consider in a full configuration, and compare roller-shade valance options before finalizing the window’s appearance.
Confirm mount and controls after the finishes are complete
An inside mount offers a recessed look when the finished frame has enough depth. World Wide Shades requires a minimum of 1.5 inches for inside mounting and recommends 2.5 inches for motorized shades. If the finished opening is shallower than the minimum, choose an outside mount. New trim and casing can change the available depth, so confirm it after the finish carpentry is done.
For an inside mount, measure width at the top, middle, and bottom and use the NARROWEST width. Measure height at the left, center, and right and use the TALLEST height. Enter the exact opening size; the factory makes the deductions. Do not subtract from the measurements. The measuring guide is a useful reference for confirming the method before you use the builder.
For outside mounting, add 2 to 3 inches on each side and 3 inches above the frame. Check how the shade will relate to crown molding, tile, a backsplash, a built-in shelf, or a window handle. If your project has multiple treatments, make sure the planned top position and overlap work with all nearby finishes.
Motorization may suit a high window or a set of shades adjusted repeatedly. World Wide Shades uses rechargeable battery motors that need no wiring. Automate is the default motor; Somfy is available for customers who already have a Somfy remote. A remote is required, and the Push 5 runs up to five shades. The Automate Pulse 2 hub adds app, voice, and schedule functions for Automate motors only. No charger is included; any USB-C charger works, or you can add the Motor Charger.
Plan the control decision before ordering if shades will be grouped in a room. Determine which windows should move together and which should operate independently. For example, you may want a living-room group on a routine while keeping a bedroom shade separate. Explore motorized shades and smart-home motorized shade setup to align the control choice with the finished room.
Compare the full order and its value
The total value of a shade order is not only the fabric choice. It includes whether each shade fits its opening, whether the opacity supports the room, whether a motor makes operation more convenient, and whether the finished design works with the renovation. A custom configuration allows the designer or homeowner to coordinate these decisions by window instead of accepting one-size specifications.
In the builder, enter each completed opening, choose the fabric, select the mount and control, and review the complete order. See live pricing in the World Wide Shades builder before you submit. The price reflects the configuration you select; World Wide Shades does not quote a fixed price in this guide. A more complete comparison is possible when you include every room and accessory you actually plan to order.
World Wide Shades offers free shipping in the United States. Every shade is 100% custom-made by hand in the USA. Manufacturing defects are remade free within 30 days, with motors covered for 1 year. Mismeasured shades receive a one-time free recut, with shipping paid by the customer. Custom orders are not returnable, which is another reason to verify the specification before checkout.
For related decisions, compare custom shades after window replacement, street-facing privacy shades, roller shades for black window frames, custom roller shades versus home-center alternatives, and window shades and home value. For a bedroom that is being handed over for two occupants, see custom shades for shared bedrooms. If the frame depth or timing is uncertain, contact World Wide Shades or call (844) 674-2716 before ordering.
Frequently asked questions
Yes. You can narrow the color, fabric family, opacity, and control while finishes are being chosen. Revisit the selection against the completed room before ordering, because the final palette and light can change how a fabric looks.
Measure after the window and the finish details that define the mounting surface are complete. Confirm the frame depth and any hardware that could affect the shade’s fit or travel.
The usual delivery window is 2 to 4 weeks from order. A limited-stock fabric or specialty shape moves the expected window to 3 to 4 weeks. Use those timelines in the project schedule and do not assume a faster delivery.
You can plan the design early, but custom orders are not returnable, so wait to submit the order until the final dimensions and configuration have been checked. If any window detail changes, revise the specification first.
World Wide Shades offers a one-time free recut for a mismeasured shade, with the customer covering shipping. Manufacturing defects are remade free within 30 days; motors are covered for 1 year.
Ready to Order?
World Wide Shades helps you move from design decisions to an order that reflects the finished window. For questions about timing, mount, or controls, call (844) 674-2716 before checkout.
- Plan and measure: Choose a provisional design early, then confirm the completed opening with the correct mount.
- Choose fabric: Match blackout, light-filtering, or solar fabric to each room’s use.
- Choose control: Select manual or motorized operation and compatible accessories.
- See live pricing and order: Build the final configuration, check the stated lead time, and submit after the measurements are verified.



